Frequently Asked Questions
A 3 gallon kit will cover +/-100 Sq Ft depending on application technique.
A 1.5 gallon kit will cover +/-50 Sq. Ft depending on application technique.
How does it compare to your competitors (Rhinoliner, LineX, Toro, etc)
What grit sandpaper do you use?
Do you have to sand it down to the metal?
What kind of lubricant do you use for the hopper gun and the bucket?
What is the working time for the product in 95-degree temperatures?
How long before I can apply the second coat?
How do I clean the spray gun between coats?
How much would I need to do the inside of a Jeep Wrangler?
Do you have the cans that attach to the spray gun?
Can it stick to anything else besides metal?
How much overspray can I expect?
Do you ship outside the United States?
Is there supposed to be rubber with the colored bedliner?
Is there video showing the application?
Can I use a 2 horse power compressor?
1/8” to 3/16” thick depending on application (Back to the top)
No we are unable to do white or very light colors. (Back to the top)
How does it compare to your competitors (Rhinoliner, LineX, Toro, etc)
Doesn’t chalk out, thinner but just as durable (Back to the top)
What grit sandpaper do you use?
36, 40 or 80 grit (Back to the top)
We can do just about any color but you will need to call and ask for specialty
colors. Below are just a few of the
colors we
have available. (Back
to the top)
No, this material is self-priming and self-etching. (Back to the top)
Do you have to sand it down to the metal?
No, but if you do it is a direct-to-metal product. (Back to the top)
What kind of lubricant do you use for the hopper gun and the bucket?
WD-40 or silicone (Back to the top)
What is the working time for the product in 95-degree temperatures?
45 minutes to an hour in the shade (Back to the top)
How long before I can apply the second coat?
Immediately after applying the first. (Back to the top)
How do I clean the spray gun between coats?
Lacquer thinner. (Back to the top)
How much would I need to do the inside of a Jeep Wrangler?
Approximately 3 gallons of material depending on application technique. (Back to the top)
Do you have the cans that attach to the spray gun?
If you buy the kit the reducer can is the can that attaches to the spray gun. (Back to the top)
Can it stick to anything else besides metal?
Yes, fiberglass, wood, cement, aluminum, galvanized steel, some plastics, clothes and skin! (Back to the top)
No, we do not suggest this method. (Back to the top)
How much overspray can I expect?
Approximately 5% (Back to the top)
Approximately, 2,500 t/s (Back to the top)
Do you ship outside the United States?
Currently, we do not ship outside the US or Alaska or Hawaii. (Back to the top)
Is there supposed to be rubber with the colored bedliner?
No, it is not necessary to add the rubber to the colored bedliner. Call for more details. (Back to the top)
Is there video showing the application?
Yes, check out our website www.rattleguard.com (Back to the top)
Can I use a 2 horse power compressor?
NO, NO, NO – Rattleguard recommends using only a 5 horse power compressor or greater. Rattleguard will not be responsible for applications using less than the recommended. (Back to the top)